What is your Chewing Gum Tins MOQ and wholesale price?

Standard MOQ is 1,000 pcs per design — uniform across every case in this library. Unit price runs $0.45 – $1.35 for the middle 50% of cases, with a median of $0.62 – 0.95. The insert and the closure move the price more than the artwork does.

Do you supply empty tins, or filled ones?

Empty — we are a tin box manufacturer and supplier, not a packer. Bodies and lids ship empty, so your own contents go in on your own line.

Can one order cover several shapes at once?

Yes. Wholesale programmes are quoted per mould, so a small box and a large box can sit in one purchase order with separate minimums.

Can I print my own artwork?

Yes — that is the whole point of reusing a mould. Send artwork or a sketch and we proof it on the real substrate within 48 hours, up to 8 colours in CMYK or spot.

What shapes and sizes can you make?

Everything in the register above, plus bespoke geometry. The library runs round, square, deep rectangular bodies with slip/hinged/magnetic lids; shaped bodies are cut to a new die.

What is the wholesale unit price of a Chewing Gum Tins?

It follows the mould and the insert, not the artwork: $0.45 – $1.35 per unit for the middle 50% of cases at 1,000 pcs, before packing and freight. A magnetic lid with flocked insert sits at the top of that band.

What are your production lead times after sample approval?

An existing mould ships in 15–20 days; a new die adds 20–25 days. Sea freight to the US and Europe is quoted separately. Ahead of peak season we schedule against your date rather than a nominal lead time.

Do you support private label and OEM programmes?

Yes. As an OEM tin box manufacturer we run private label programmes end to end — tooling, print, insert, packing and export documents on one line, with your brand on the box and nothing of ours.

Can you ship to the UK, US, Australia and Canada?

Yes, FOB Ningbo / Shanghai / Shenzhen. Tell us the destination market and we match the relevant requirements — toy and packaging compliance such as small-parts warnings and EN71.

Is the inner wall food-grade and compliant?

Yes. The inner wall carries a food-safe anti-rust / acid-resistant lacquer, inert against sugar and flavour and passing food-contact compliance; outer print inks are also food-contact safe.

Can you print inside the lid?

Yes. Body and lid are quoted as separate printing passes, so a lid-only print is the cheapest way to add a second surface — common on branded gum, where the inside of the lid carries a flavour list or brand story.

Does a shaped or magnetic-lid box need a new mould?

Only when no close profile exists in the library. Square and deep rectangular bodies are already held; a genuinely new shape or magnetic structure adds 20–25 days of tooling and is quoted as a separate line.

Home
/
Packaging Cases
/
chewing gum

MOQ from 1,000 pcs on stock moulds · Free sampling

Chewing Gum Tins

Q: Does gum get damp or take on other smells in the tin?

Not if the sealed lid is specced right. The lid seats under compression, so once closed it keeps moisture out and flavour in, and re-seals after opening.

Built Around Freshness and Compliance

Turning Any Case Above Into Custom Chewing Gum Tins

As a chewing gum tin manufacturer, a gum build is specified against food grade, sealing and acid resistance before it is specified against artwork — damp, off-flavour or failed compliance is the most common reason one of these gets returned. Four things get settled before one goes back on the line.

Food-grade lining, inert against sugar and acid

The fill is food, so the inner wall carries a food-safe anti-rust / acid-resistant lacquer — no leaching, no transfer, and it passes food-contact compliance. This is fixed before tooling.

The right sealed lid: slip, hinged or magnetic

A thin slip lid for pocket carry; a hinged lid for shelf stand; a magnetic lid for a limited gift box. All three run the same mould, and the choice is made before the artwork because it changes the lid layout.

Wall gauge matched to the filled weight

A box full of sweets is carried and stacked. The wall gauge is matched to that weight rather than to the thinnest stock, so a gum tin arrives without a dent.

Print that passes food-contact safety

Outer-wall print uses food-contact-safe inks, so it doesn't wear under handling; foil or UV are accents rather than a full flood, balancing feel and compliance.

Built to Keep It Fresh

How These Chewing Gum Cases Hold Up

A chewing gum tin has to keep moisture out, lock flavour in and travel in a pocket. Three things decide whether it stays fresh; on every case above all three were fixed before printing started.

A sealed lid that locks flavour and keeps moisture outChewing gum goes hard and takes on other smells when it gets damp. The lid seats under compression, so once closed it keeps moisture out and flavour in, and re-seals after opening.